Open Position
Process Engineer (AGA)
Location: Bang Pa-In Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Response for project handover to serial production, line qualification and product realization by coordinate with Project manager and process engineer of the MTCE.
- Improve productivity and quality of product.
- Manage of engineering changes.
- Reporting problem or potential problem to engineer section head and/manager.
Qualifications :
- Bachelor’s degree or higher in Engineering or related field (Mechanical/Mechatronics/Automation Major).
- At least 5 years of experience in automotive production or a related manufacturing environment.
- Proficient in MiniTab and Microsoft Office.
- Good command of English, both written and spoken.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Process Engineer-Medical Device (PMC)
Location: Bang Pa-In Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Report directly to the Engineering Manager on operational performance and team progress.
- Support and promote the achievement of departmental engineering objectives and goals.
- Design and prepare validation reports and relevant documentation for medical device product groups.
- Regularly evaluate and review operational performance to drive process and personnel improvement and development.
- Assist in the procurement and allocation of necessary resources to support departmental operations.
- Support departmental and corporate initiatives on quality assurance and workplace safety.
- Supervise, monitor, and verify the performance of subordinates to ensure alignment with standards and expectations.
- Conduct regular meetings to communicate work-related updates, departmental/company regulations, and address any arising issues.
Qualifications :
- Bachelor's degree or higher in Chemistry or a related field.
- Minimum of 3 years of experience in medical device manufacturing.
- Good command of English, both written and spoken.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Production Engineer Staff
Location: Lopburi Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Manage manpower allocation and oversee production planning to ensure efficient operations.
- Collaborate with team leaders to plan and prepare necessary spare parts for production activities.
- Coordinate production plans with the Production Control team to align with overall schedules and targets.
Qualifications :
- Bachelor's degree in Industrial Engineering, Mechanical Engineering, Mechatronics Engineering, Metallurgical Engineering, Production Engineering, or a related engineering field.
- Ability to analyze production line issues and provide recommendations for improvement and corrective actions.
- Capable of improving and enhancing production process efficiency, and establishing standard procedures for each production step.
- Able to work effectively under pressure.
- Good command of English in speaking, listening, and writing.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Quality Assurance Engineer staff
Location: Banwa Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Find the corrective action (FACA) and 8D Report of Automotive parts for customer claim.
- Follow-up the effectiveness the action of customer claim.
- Monitoring the quality result in customer process and feedback to all concern for improvement.
- Patrol process to check the abnormal articles.
- Support customer requirement.
- Support customer representative.
- Support Quality System.
- Authority for stop line/Stop Shipment (Hold).
- Solve and analyze problem when found defect.
- Training and up skill to QC operator.
Qualifications :
- Education:
- Bachelor’s Degree in Engineering Major in Industrial Engineering or related fields.
- Experience:
- 1–2 years of experience in Quality Assurance or related functions.
- Technical Skills:
- Proficient in Microsoft Excel and PowerPoint.
- Able to solve and analyze problems related to defects.
- Understands and can implement FACA and 8D reports for customer claims.
- Language Skills:
- Excellent English communication skills (verbal and written).
- Able to communicate effectively and prepare reports in English.
- TOEIC not required
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Production Engineer (Intec model)
Location: Lopburi Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Production Control & Improvement
- Manage Input & Output processes according to the Production Control (PC) plan.
- Control and allocate production manpower efficiently.
- Coordinate and support other departments as per their requirements.
- Implement 5S and safety activities in production areas.
- Monitor and control rework processes.
- Manage scrap and waste reduction initiatives.
- Drive continuous improvement processes within the production line.
- Monitor yield and pass ratio performance.
- Analyze the top defect causes and implement corrective actions.
- Identify and propose solutions for process improvement.
- Control machine and resource utilization effectively.
- Enhance overall productivity and operational efficiency.
- Document Control.
- Manage Engineering Change Notice (ECN) / Engineering Change Request (ECR) processes.
- Issue and conduct training for Work Instructions (WI) and Quality Instructions (QI) for new models.
- Control initial production flow and handle English documentation matters.
- esolve Bill of Materials (BOM) and drawing issues, including ESS system management.
- New Model Management.
- Handle new model preparation, including Cycle Time (C/T) setup and Contract Review (4M review).
- Oversee the production phase from Sample, Pilot, to Mass Production (MP).
- Coordinate with Japan teams and manage customer claim actions effectively.
- Daily Problem Solving.
- Address and resolve software-related issues, such as certification link failures and TC errors.
Qualifications :
- Bachelor’s Degree in Engineering, majoring in Industrial Engineering, Mechanical Engineering, Electrical Engineering, or Production Engineering.
- Minimum 1 year of experience in production control, problem-solving related to production issues (e.g., manpower, machinery).
- Strong knowledge and understanding of production processes, quality control, production planning, and follow-up to achieve targets.
- Good command of English in listening, speaking, reading, and writing.
- Proficiency in basic computer programs such as Microsoft Excel, PowerPoint, SolidWorks, and AutoCAD.
- Skills and experience in problem analysis and utilization of problem-solving tools in production, such as QC 7 Tools, 8D (8 Discipline Problem Solving), PDCA, 5 Why Analysis, and Root Cause Analysis.
- Responsible, disciplined, with a positive attitude and good interpersonal skills.
- Good skills in reading technical drawings and part lists.
- Strong communication and coordination skills with other departments.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Production Engineer Staff (NAT)
Location: Bang Pa-In Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Operate machines and follow production procedures as instructed.
- Report any machine problems to the supervisor.
- Check and record the productivity and quality.
- Follow safety , 5S , other tanks that arrange from supervisor or management.
- Coordinate with relate department , Control and consult to operator.
- Able to work in Machineshop and cleanroom environments, and wear a smock as required.
Qualifications :
- Bachelor’s Degree in Engineering, majoring in Electrical Engineering.
- Electronics Engineering.
- Industrial Engineering.
- Mechanical Engineering.
- Production Engineering.
- Good command of English in listening, speaking, reading, and writing.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Incoming/Outgoing Quality Control Staff
Location: Bang Pa-In Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Review IQC inspection data and confirm shipping data from supplier.
- Coordinate with the in-process team concerning the supplier quality issue.
- To analyze and coordinate with the supplier to take action on the quality problem found, and to plan preventive actions to prevent the problem from recurring.
- To establish a report in case any nonconforming part caused by the supplier is found, and to issue the report to the supplier.
- To do quality improvement projects assigned by management.
- Support ISO14001, ISO45001, TLS8001, CSR, BCM and IATF16949 requirements.
Qualifications :
- Education Level Bachelor's Degree.
- Major Industrial Engineering, Statistics science.
- Experience Fields Supplier Quality Engineer (SQE).
- Experience Period At least 2 years of experience as a Quality field.
- Remark Knowledge of IATF 16949:2016, APQP, PPAP, FMEA, and 8D requirements is preferred.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Quality Control (Inprocess) Staff
Location: Bang Pa-In Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Take responsibility for daily and monthly quality issues on the production line and generate corresponding reports.
- Follow up on root causes and corrective actions to meet the division’s target policies.
- Lead initiatives to improve processes and reduce scrap costs and quality issues, addressing customer complaints through the 8D reporting system.
- Monitor in-line data and Statistical Process Control (SPC) data in accordance with customer requirements.
- Communicate and coordinate effectively with relevant personnel both internally and externally across divisions.
Qualifications :
- Bachelor's degree in Science, Engineering, or a related field.
- Able to work under high pressure with a positive attitude and strong leadership skills.
- Willing to work in cleanroom and chemical environments; no cosmetic makeup allowed in these areas.
- Strong interpersonal, communication, and analytical skills.
- Good command of English, both written and spoken.
- Proficient in Microsoft Office; knowledge of Minitab is an advantage.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Machine Maintenance Engineer
Location: Bang Pa-In Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Perform preventive and corrective maintenance on industrial machines and electrical systems.
- Troubleshoot and resolve issues in Mitsubishi PLC systems (FX, Q, and iQ-R series).
- Program and modify PLC logic using GX Works2/3, GT Designer, and Sequential Function Chart (SFC).
- Establish and maintain machine network communication using Ethernet, RS-485, and Modbus RTU/TCP.
- Integrate machines with IoT or SCADA platforms for real-time data monitoring and reporting.
- Diagnose and repair faults in machine control systems, including sensors, actuators, and communication lines.
- Interpret and update electrical schematics and machine wiring diagrams.
- Collaborate with IT and Automation teams to design and maintain machine-to-machine (M2M) communication and data flow architecture.
- Maintain detailed documentation for all PLC programs, HMI configurations, and communication setups.
- Ensure all tasks are performed in compliance with safety, quality, and operational standards.F7
Qualifications :
- Bachelor’s degree in Electrical, Electronics, Mechatronics, or a related field.
- Minimum 2 years of experience in industrial machine maintenance and automation.
- Proficiency in Mitsubishi PLC programming using Ladder Logic and Sequential Function Chart (SFC).
- Hands-on experience with Modbus RTU/TCP communication protocols.
- Solid understanding of industrial network communication, including: Ethernet/IP ,RS-485/232,TCP/IP
- Network switches and IP addressing.
- Familiarity with HMI/SCADA platforms for machine monitoring and control.
- Ability to integrate and communicate with industrial devices such as sensors, drives, and remote I/O modules.
- Experience with IoT platforms such as Node-RED or MQTT-based systems.
- Familiarity with MELSEC communication protocols.
- Basic scripting/programming experience with Python or similar tools.
- Knowledge of CMMS (Computerized Maintenance Management System) software.
- Certification in Mitsubishi automation or other industrial control systems.
- Excellent analytical and troubleshooting skills.
- Strong communication and documentation abilities.
- Team player with the ability to work independently under pressure.
- Flexible and willing to work in shifts or during machine downtime.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
Production Engineer Staff (M)
Location: Lopburi Factory, Thailand
Application Deadline: Open until filled
Job Descriptions :
- Responsible for the Production section to ensure manufacturing is carried out efficiently and effectively.
- Plan and implement management systems and delegate tasks to employees in the section to ensure optimal performance and efficiency.
- Plan and prepare the appropriate number of employees and overtime arrangements in line with production plans.
- Plan and ensure the maintenance and cleanliness of machinery to keep them ready for use at all times, and propose improvements to maximize efficiency.
- Plan and arrange machinery layout to suit work processes, and prepare sufficient tools and equipment in line with production plans.
- Foster quality and productivity awareness among employees, develop their knowledge and skills, and continuously resolve quality and production issues.
- Plan and improve work processes to reduce production defects, and enhance employee performance to achieve departmental goals.
- Establish communication and information-sharing systems within the section to ensure employees work in accordance with standards and remain motivated for maximum efficiency.
- Ensure employees in the section maintain and develop their knowledge, skills, and competencies.
- Oversee workplace safety for employees, and improve work methods and equipment with a focus on maximum safety.
- Support the implementation of 5S, Safety, OHSAS 18001, and other departmental or company requirements.
- Plan, implement, and regularly assess the development of employees’ knowledge, skills, and competencies.
Qualifications :
- Bachelor’s Degree in Engineering (Mechanical, Industrial, or related fields).
- Good English Skill for communication.
- Computer Skills :
- Microsoft Office (Excel, PowerPoint), AutoCAD, SolidWorks, Web (Google Workspace).
- Special Skills :
- Knowledge of CNC machines, Pneumatic & Hydraulic systems, and PLC.
- Strong leadership skills.
- High stress tolerance.
- High sense of responsibility.
- Self-confidence.
- Good interpersonal skills and sociable.
- Flexible with time management.
For more information, please contact:
Email: recruit@minebea.co.th
Tel: 035-361439 ext. 1721, 1777
Mobile: 089-926-2177, 081-907-4948, 080-059-0252
